INSTALLATION INSTRUCTIONS FOR HUNTER

CEILING FAN LIGHT KITS MODELS:

28330, 28331, 28332, 28333, 28334, 28335, 28336, 28337, 28338, 28339, 28340, 28341, 28342 28343, 28344, 28345, 28405, 28406, 28407, 28408, 28982, 28983, 28984, 28985, 28986, 28987

C AUTIONS

•Read entire text carefully before beginning in- stallation and save these instructions.

•To reduce the risk of electrical shock, install

this light kit only on listed Hunter ceiling fan models: Cote D’ Azur , Custom Home 2 , Captiva , 44” Dominion , Designer’s Choice , ORBit , 52” Dominion , M arseille , Santa Barbara , Belle Meade & Etruscan

WARNING

•To avoid possible electrical shock, before in- stalling light fixtures, disconnect power by turning off the circuit breakers both to the outlet box and to its associated wall switch location. If you cannot lock the circuit break- ers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.

•C onnect house wiring to the fan before at- taching the light fixture to the fan.

•All wiring must be in accordance with na- tional and local electrical codes and ANSI/ NFPA 70. If you are unfamiliar with wiring, you should use a qualified electrician.

STEP 1: REMOVING WIRING HARNESS

Before you can install the modular accessory light kit, you must remove the wiring harness and its com- ponents from the modular switch housing on the fans listed above. You must then install the wiring harness into the modular accessory light kit.

NOTE: Refer to Figure 1 for the steps listed below.

1.Locate the reversing switch and carefully remove the two screws holding the reversing switch to the switch housing. The reversing switch can now be removed from the switch housing.

2.Remove the patented breakaway connector from the fan pull chain.

3.Carefully loosen the bellmouth nut from the fan pull chain and remove the fan pull chain switch from the switch housing.

Light K it Lead W ires and W ire Nuts

Bellmouth Nut

 

Fan Speed

 

Switch

Capacitor

Capacitor

 

M ulti-wire Plug

 

Connection

M 3 Housing

 

Assembly Screws

Reverse Switch

FIGURE 1

4.Locate and carefully remove the two capacitors from the switch housing.

5.You have now disconnected the wiring harness and its components from the switch housing and are ready to install them into the modular acces- sory light kit.

STEP 2: INSTALLING WIRING HARNESS

NOTE: Refer to Figure 1 for steps listed below.

1.Locate the two wires in the lower switch housing labeled “ Connect Light Here” or “ For Light Use” . One will be white, the other black/white. Unscrew the wire nuts counterclockwise to expose the bare metal leads.

2.Locate the white wire and the black wire coming from the light fixture.

Connect the black wire from the light fixture to the black/white wire from the lower switch hous- ing.

Connect the white wire from the light fixture to the white wire from the lower switch housing.

To fasten the wires, twist the two bare leads to- gether. Place a wire nut over the intertwined length of wire and twist clockwise until tight.

41490-01 12/01/2005

Page 1 Page 2
Page 1
Image 1
Hunter Fan 28984, 28983, 28982, 28405 installation instructions Autions, Removing Wiring Harness, Installing Wiring Harness
Page 1 Page 2

28408, 28343, 28345, 28344, 28407 specifications

The Hunter Fan Company is renowned for its innovative ceiling fans that combine functionality and style. Among their extensive product lineup, the models 28408, 28343, 28982, 28983, and 28984 stand out for their unique features, technology, and sleek designs, catering to diverse consumer preferences.

The Hunter Fan 28408 is a product that emphasizes both aesthetics and efficiency. This model sports a modern industrial design, making it suitable for contemporary living spaces. It features a whisper-quiet motor that operates smoothly, ensuring a peaceful environment whether in a bedroom or a home office. The fan is also equipped with reversible blades, allowing users to change the airflow direction, which aids in both cooling during summer and warmth distribution in winter.

The Hunter Fan 28343 is designed with the needs of larger spaces in mind. This model boasts an impressive blade span, ensuring maximum air circulation. The integrated LED light kit enhances its versatility, providing sufficient illumination to keep rooms bright and welcoming. The fan is compatible with smart home technology, enabling users to control it through mobile applications or voice commands, elevating the convenience factor significantly.

Model 28982 showcases a more traditional aesthetic while incorporating modern technology. Its elegant finish complements classic interiors, making it a favorite among those who prefer vintage decor. The fan comes with a powerful motor that ensures optimal airflow while running quietly. The included remote control provides effortless operation, allowing users to adjust settings from anywhere within the room.

For those seeking a more rustic appeal, the Hunter Fan 28983 is an excellent choice. Its wood finish blends seamlessly with country or farmhouse-themed interiors. Similar to the previous models, it includes an energy-efficient LED light kit, ensuring that both form and function are prioritized. The fan's sturdy construction ensures durability, making it a reliable addition to any home.

Finally, the Hunter Fan 28984 rounds out this selection with a unique design that caters to a modern yet cozy aesthetic. This model features an advanced motor capable of delivering impressive airflow while maintaining low noise levels. The fan is designed to be energy-efficient, allowing users to enjoy cool breezes without incurring high energy bills.

Overall, the Hunter Fan models 28408, 28343, 28982, 28983, and 28984 each present their own blend of style, practicality, and cutting-edge technology, making them viable options for any homeowner looking to enhance their living space.
Top Page Image Contents