Air Purifier Parts
Figure 1
Models 30055, 37055, 30070, 37065, 30075 and 30080 all open in the same manner.
Using Your Air Purifier
1.Remove your air purifier from the box and take it out of the clear plastic protective bag.
2.Place your HEPAtech™ Air Purification System on a firm, flat surface. Before turning the Air Purifier ‘on’, you need to open the front grill and remove any protective plastic that may be surrounding the HEPAtech™ filter. To release the front grill, place your fingers behind the tabs and pull forward.
3.The filter will be installed in the correct position.Grasp the filter and pull it forward. When you replace the filter in the unit, the white filter material should be facing outward (towards you) and the black carbon material should be hidden from view (inside the unit).
4.Replace the front grill. Be sure that the bottom tabs are in location first, and then push the top of the grill forward until it is closed. The unit is now ready for normal operation. NOTE: The unit will not operate unless the door is placed in the proper position.
5.Plug the unit into a 120V electrical outlet.
Models 30054, 30055 and 37055
6.Turn the unit ‘on’ with the rocker switch. The green light will be illuminated when the power is on. Then, select a speed by sliding the speed selector to the appropriate loca- tion.
Models 30070 and 37065
7.Turn the power ‘on’ by sliding the slide switch to the appropriate speed. You may also use the ionizer with this model. To turn the ionizer ‘on’, press the rocker switch to the ‘l’ position. The green light will be illuminated when the ionizer is ‘on’.
Models 30075 and Model 30080
8.Turn the power ‘on’ and choose the appropriate speed with the rotary switch. You may also use the ionizer with this model. To turn the ionizer ‘on’, press the rocker switch to the ‘l’ position. The green light will be illuminated when the ionizer is ‘on’.
3 | © 2007 Hunter Fan Company |
