Programming
Setting Day and Time
Setting the correct day and time allows the programs to work effectively and provides a clock for your reference. Although the instructions for setting the day and time are listed under Initial Operation, they are repeated below for your convenience.
Adjusting Day and Time: (For example, Wednesday at 3:45 pm)
DAY
1. To set the day or time, press the DAY/TIME key. All
TIME display features except the day and time will go blank and the hour will flash.
2. Use the UP/DOWN keys to adjust the hour. Tapping the key will advance the hour by increments of one. Holding down the key will change the hour rapidly. Note the AM/PM indicator as you cycle through a 24 hour period.
DAY | 3. Press the DAY/TIME key again. Now, the minutes will | ||||
TIME | be flashing. Use the UP/DOWN keys to adjust the | ||||
|
|
|
|
| minute. Tapping the key will change the minute by in- |
|
|
|
|
| crements of one and holding the key will change the |
|
|
|
|
| |
|
|
|
|
| minute rapidly. |
|
|
|
|
|
DAY 4. Press the DAY/TIME key to accept the minute setting
TIME and go to the day of the week. Use the UP/DOWN keys to set the current day.
DAY | 5. Press the DAY/TIME key a final time to accept the day |
TIME | setting and return to Normal mode. |
Fig. 19
Fig. 20
Fig. 21
|
| Continued | Fig. 22 |
|
|
| |
| 13 | ||
13 | 3/11/05, 5:01 PM |