Hunter Fan 41897-01 manual Assembling the Blades and Hanging the Fan

5 • Assembling the Blades and Hanging the Fan
		Note: If available, use a magnetic tip screwdriver.
		5-1. Insert the grommets into the holes in the blades.
		5-2. Attach each blade to the blade iron and medallion using the three
		blade assembly screws. Insert the assembly screws into the blade
		iron, through the blade and into the medallion, with the blade
		captured between the blade iron and medallion. e blades may
		appear slightly loose after the screws are tightened. is is normal.
		5-3. Remove the blade iron mounting screws from the motor. Discard
		the shipping blocks and save the screws.
		5-4. Partially install one blade iron mounting screw through a blade
		iron and into the motor. Insert a second blade iron mounting
		screw, then securely tighten both screws.
		5-5. Raise the fan and place the hook on the ceiling plate through the
		U-shaped hole in the rim of the canopy.
		WARNING: Fan may fall if not assembled as directed in these
8		installation instructions.
	Blade Iron	Steps 5-1 – 5-4	Step 5-5
	Mounting Screw
		Blade Assembly	U-shaped
			Hole
		Screw

Grommet

Medallion

Hunter Fan Company 41897-01 • 11/22/05