Hunter Fan 42503-01 warranty Completing Your Installation

7 • Completing Your Installation

7-1. To attach the upper switch housing, partially install two housing assembly screws into the switch housing mounting plate.

7-2. Feed the upper plug connector through the center opening of the housing.

7-3. Align the keyhole slots in the housing with the housing assembly screws.

7-4. Turn the housing counterclockwise until the housing assembly screws are firmly situated in the narrow end of the keyhole slots. Install the remaining screw into the housing. Tighten all three screws firmly.

CAUTION: Make sure the upper switch housing is securely
attached to the switch housing mounting plate. Failure to properly	Steps 7-1 – 7-3
attach and tighten all three assembly screws could result in the
		Housing
switch housing fixture falling.			Upper
		Assembly
7-5. To attach the lower switch housing, connect the upper plug		Screw	Switch
			Housing
connector from the motor to the lower plug connector in the			11
lower switch housing assembly.
Note: Both plug connectors are polarized and will only fit together
one way. Make sure the connectors are properly aligned before
connecting them. Incorrect connection could cause improper
operation and damage to the product.					Plug
				Connector

7-6. Place the lower switch housing assembly over the upper switch
housing. Align the side screw holes in the upper and lower switch
housings. Attach the lower switch housing to the upper switch
housing with three housing assembly screws.	Steps 7-5 – 7-6
		Lower Switch
		Housing
		Plug
		Connector
	Housing	Detail
	Assembly Screw

42503-01 • 02/08/06 Hunter Fan Compan