Hunter Fan 42503-01 warranty Wiring the Fan, Dual Switch Wiring, Single Switch Wiring

4 • Wiring the Fan

Wire Nut

Dual Switch Wiring

8

Single Switch Wiring

All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician.

Wall switches are not included. Select an acceptable general-use switch in accordance with national and local electrical codes.

4-1. Make sure the power to the outlet box and associated wall switch location is still OFF.

To connect the wires, hold the bare metal leads together and place a wire nut over them, then twist clockwise until tight.

CAUTION: Be sure no bare wire or wire strands are visible after making connections.

Dual Switch Wiring:

•e bare or green ground wire from the ceiling to the green ground wire from the ceiling plate and the green ground wire from the fan

•e white wire from the ceiling to the white wire from the fan

•e black wire from the ceiling to the black wire from the fan

•e black/white wire from the ceiling to the black/white wire from the fan

Single Switch Wiring:

If you want to, you can control both fan and light with one switch. To do so connect the wires as follows:

•e bare or green ground wire from the ceiling to the green ground wire from the ceiling plate and the green ground wire from the fan

•e white wire from the ceiling to the white wire from the fan

•e black wire from the ceiling to the black and the black/ white wire from the fan

4-2. Push all wires and wire nuts back through the ceiling plate hole into the outlet box.

Hunter Fan Company 42503-01 • 02/08/06