Hunter Fan 42616-01 warranty Steps

8 • Completing Your Installation With or Without a Light Fixture

Steps 8-1 – 8-4

Housing Upper

Assembly Switch

Screw Housing

Your Hunter fan comes with a switch housing assembly and an optional light fixture. is feature gives you the option of installing the fan with OR without the included light fixture. e steps below direct you whether or not you are installing a light fixture.

WARNING: Use only the light fixture supplied with this fan model.

8-1. To attach the upper switch housing, partially install two housing assembly screws into the switch housing mounting plate.

8-2. Feed the upper plug connector through the center opening of the housing.

8-3. Align the keyhole slots in the housing with the housing assembly screws.

8-4. Turn the housing counterclockwise until the housing assembly screws are firmly situated in the narrow end of the keyhole slots. Install the remaining housing assembly screw into the housing. Tighten all three screws firmly.

CAUTION: Make sure the upper switch housing is securely	11
attached to the switch housing mounting plate. Failure to
properly attach and tighten all three assembly screws could
result in the switch housing and light fixture falling.

8-5. If you want to install the light fixture, proceed with step 8-6 now. If you do not want to install the light fixture, proceed with step 8- 11 now.

42616-01 • 02/20/06 Hunter Fan Company

42616-01 rev 02-14-06.indd 11 2/20/2006, 3:17 PM