Hunter Fan 42660-01 warranty Uninstalling the Light Fixture

8 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Uninstalling the Light Fixture

8-15. To uninstall the light fixture, first disconnect the plug connectors between the black wire and the black/white wire.

8-16. Disconnect the plug connectors between the two white	Lower Switch
	Housing
wires.

8-17. Uninstall the connector and washer from the end of the light fixture inside the lower switch housing.

8-18. Unscrew the threaded rod of the light fixture from the lower switch housing.

8-19. Remove the light fixture from the lower switch housing	Threaded Rod
pulling disconnected wires through the hole in the
center of the lower switch housing.

Note: When removing the wires, pull the thin plug connector (male) through first, and then pull the other plug connector (female) through the hole.

8-20. Install the dummy terminals (included in the sack parts)

on the two disconnected wires in the lower switch housing.

8-21.	Install the switch housing cap and plug button to the
	lower switch housing.			Steps 8-17 – 8-19
8-22.	Once you have uninstalled the light fixture, continue
	with step 8‑6.
		Male Dummy
		Terminal	Cap
		Female Dummy
		Terminal	Plug Button

Step 8-21

14

42660-01 • 01/30/08 • Hunter Fan Company