Hunter Fan 42856-01 installation manual Installing the Glass Bowl

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Installing the Glass Bowl

7-8.	First install included B10 (60 Watts Maximum) bulbs into the
	sockets.
7-9.	If the fandangle is attached to the extra pull chain, remove it now.
7-10.	Attach the extra pull chain (included) to the fan pull chain using	Breakaway
	the plastic breakaway connector. (You may find the plastic	Connector
	breakaway connector on the end of the extra chain.)
7-11.	Thread the fan pull chain through the hole in the metal disc. Then,
	thread the fan pull chain through the hole in the center of the glass		For Light Bulbs
	bowl.
7-12.	Thread the light pull chain
	through the hole in the center of
	the glass bowl. Then, Thread the
	light pull chain through the hole			Metal Disk
	in the center of the cover plate.
7-13.	Thread the fan pull chain through
	the grommet hole in the side of
	the cover plate.			Metal Rod
7-14.	Place the cover plate up against
	the glass bowl. Align the holes in
	the cover plate and glass bowl.
7-15.	Thread the light pull chain			Glass Bowl
	through the finial and screw the
	finial onto the threaded rod end
	until tight.			Cover Plate
7-16.	Reattach the fandangle to the
	extra pull chain.			Finial

12

42856-01 • 01/30/09 • Hunter Fan Company