Hunter Fan 42856-01 installation manual Uninstalling the Light Fixture

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Uninstalling the Light Fixture

7-17. To uninstall the light fixture, first disconnect the plug connectors between the black wire and the red wire.

7-18. Disconnect the plug connectors between the two white
wires.
7-19. Remove the two screws attaching the light kit to the lower
switch housing.	Lower Switch
7-20. Remove the light fixture from the lower switch housing,
	Housing
pulling disconnected wires through the hole in the center of
the lower switch housing.
Note: When removing the wires, pull the thin plug
connector (male) through first, and then pull the other plug
connector (female) through the hole.
7-21. Install the dummy terminals (included in the sack parts) on
the two disconnected wires in the lower switch housing.	Threaded Rod
7-22. Install the switch housing cap and plug button to the lower
switch housing.
7-23. Once you have uninstalled the light fixture, continue
with step 7‑6
	Steps 7-17 – 7-20

Male Dummy

Terminal

Female Dummy Terminal

Cap

Plug Button

Step 7-22

13

42856-01 • 01/30/09 • Hunter Fan Company