Hunter Fan 42856-01 installation manual Installing the Motor Housing

5 • Installing the Motor Housing

5-1. Place the fan housing over the motor.

5-2. Raise the trim ring to allow access to the holes on the ceiling plate.

Note: Let the trim ring rest sitting diagonally on ceiling plate to keep the trim ring out of the way while installing the canopy screws.

5-3. Align the holes in the fan housing with the holes in the ceiling plate.

5-4. Partially install each canopy screw into the holes in the fan housing and into the ceiling plate until all holes are aligned. Securely tighten all screws.

5-5. Lower the trim ring on the ceiling plate to cover the canopy screws that were installed in the previous step.

Ceiling Plate

Trim Ring

Canopy

Screw

Housing Steps 5-1 – 5-3

Canopy Screw

8

42856-01 • 01/30/09 • Hunter Fan Company