INSTALLING AND CHANGING THE BATTERY
Open the battery-chamber door by sliding the batter y-chamber
lock to the open position.
Inser t the batter y with the batter y contacts first. Inser t the bat-
tery so that it slides past the battery latch in the chamber. Push
the battery into the chamber until the latch clicks into place.
This digital camera uses one NP-400 lithium-ion battery. Before using the batter y, read the safety
warnings on pages 4 of this manual. When replacing batteries, the camera should be off.
To remove a battery, slide the battery latch to the side of the bat-
tery chamber; the battery will spr ing out.
Close the battery-chamber door and slide the battery-chamber
lock to the close position.
23