33
BASIC RECORDING OPERATION
Place the subject within the focus frame. For off-center sub-
jects, use the focus-lock function (p. 34).
The subject must be within the focus range of the lens: 0.5m
(1.6ft) - ∞.For subjects closer than 0.5m (1.6ft), use the macro
function (p. 49).
Use the zooming ring to frame the subject (2). The effect of the
zoom is immediately displayed in the viewfinder (EVF) and
LCD monitor.
Press the shutter-release button partway down (2) to lock the
focus and exposure. When the focus is set, an AF sensor will
briefly appear in the live image to indicate the point of focus.
The focus signals (p. 35) on the monitors will confirm that the
image is in focus. If the focus signal is red, the camera was
unable to focus on the subject. Repeat the previous steps until
the signal is white.
The shutter speed and aper ture value will change from white
to black indicating the exposure is locked.
Press the shutter-release button all the way down (4) to take
the picture.
The access lamp will glow indicating the image data is being
written to the memor y card. Never remove a card while data is
being transferred.
Shutter-speed and aper ture
Focus signal
AF sensor
1
2
3