Changing the Memory Card DATA-TRANSFER Mode

CHANGING THE MEMORY CARD (DATA-TRANSFER MODE)

Care should be taken when changing memory cards while the camera is attached to the computer. Data could be lost or damaged if the camera is not properly disconnected. Always confirm the access lamp is out before removing the memory card.

WINDOWS 98 / 98 SECOND EDITION

1.Turn off the camera.

2.Change the memory card.

3.Turn on the camera to remake the USB connection.

WINDOWS ME, 2000 PROFESSIONAL, AND XP

1.Stop the USB connection using the unplug-or-eject-hardware routine (p. 154).

2.Turn off the camera.

3.Change the memory card.

4.Turn on the camera to remake the USB connection.

MACINTOSH

1.Stop the USB connection by dragging the drive icon into the trash (p. 155).