148 DATA-TRANSFER MODE
CONNECTING TO WINDOWS 98 / 98 SECOND EDITION
The driver needs only to be installed once. If the driver cannot be installed automatically, it can be
installed manually with the operating system’s add-new-hardware wizard; see the instructions on the
following page. Dur ing installation, if the operating system requests the Windows 98 CD-ROM, inset it
into the CD-ROM drive and follow the accompanying instr uctions on the screen. No special driver
software is required for other Windows operating systems.
AUTOMATIC INSTALLATION
Before connecting the camera to the com-
puter, place the DiMAGE Viewer CD-ROM
in the CD-ROM drive. The DiMAGE
installer menu should automatically acti-
vate. To automatically install the Windows
98 USB driver, click on the star ting-up-the-
USB-device-driver-installer button. A win-
dow will appear to confirm that the driver
should be installed; click “Yes” to continue.
When the driver has been successfully
installed, a window will appear. Click “OK.”
Restar t the computer before connecting
the camera (p. 147).