REAR FLASH SYNC
Rear flash sync is used with long exposures to make trailing lights or blurring appear to follow rather than proceed the subject. The effect is not apparent if the shutter speed is too fast and stops the subject’s motion.
When the shutter is released, a
Camera Notes
Slow shutter sync can be set in P and A exposure modes. This flash mode controls the shutter and aperture to balance the ambient and flash illumination. When photographing a subject out- side at night, the
1. Set the camera to the P or A exposure mode (p. 50).
2. Frame the subject on the monitors.
3.Press and hold the AE lock button to lock the exposure.
4.Press the
the image on the monitors.
5. Press the
The operation of the AE lock button can be changed in section 1 of the recording menu.
System Accessories
The
87 
