Hunter Fan 44360 Read This Before Installing Thermostat (continued), Features, ENERGY STAR® Partner, rent time, NOTE:, POWER FAILURE, AUTO RECOVERY, BATTERY WARNING

41644_model44360_web.pmd

6

Read This Before Installing Thermostat (continued) 6

POWER FAILURE

7Whenever the main power is interrupted or fails, the battery power retains the programs and cur-

rent time.AUTO RECOVERY

8Your thermostat is set from the factory to gradually recover the room temperature from an energy sav-

ing program to your comfort program. Therefore, the thermostat may turn your system on several minutes prior to your programmed time. This operation is nor- mal, but can be turned off. Refer to the Selector Switches information on page 24.

BATTERY WARNING

9Fresh alkaline batteries should provide over one year of service. However, when the batteries be-

come drained, the Low Battery indicator will flash on the display. When this message occurs, install 2 new AA batteries. You have approximately 1 minute to

change the batteries and keep thermostat’s clock and program settings. Once the batteries have become too low to ensure proper operation, your system will be turned Off, and the display will be cleared except for the Low Battery indicator flashing on the LCD display.

CAUTION: Once the Low Battery only display oc- curs, the thermostat is shut down, and your system will no longer operate. In this condition, there is no temperature control of your dwelling.

NOTE: The INDIGLO® night-light will not function when the thermostat is in low battery condition.

NOTE: If you plan to be away from the premises over 30 days, we recommend that you replace the old batteries with new alkaline batteries prior to leaving.

ENERGY STAR® Partner

As an ENERGY STAR® Partner, Hunter Fan Co. has determined that this programmable thermostat meets the ENERGY STAR® guidelines for energy efficiency.

7

Features 7

LCD Display: Shows time, day, temperature, program number, and other feature information as required.

Home Today: Overrides	Up and Down Keys: Keys for changing
energy-saving program
	the Temperature setting. Also used for
temperatures while you are
	increasing and decreasing selections in
home for the day.
	the Time, Program, and Span functions.

Energy: Measures and displays heating and cooling system operating time for Today, Yesterday, This Week, Last Week, or Total. By monitoring your energy usage, you can program the thermostat to optimize energy savings.

energy

AM

2

HEAT

SA	home
TEMP	ay
	tod

Program Key: Used for entering and modifying Programs. Use with the Up and Down keys to set times and temperatures. Press when in Clock setting mode to select between 12 and 24 hour clock modes.

	system
	heat
System Switch:	off
	cool
Selector switch for
Heat, Cool, and Off	fan

auto

on

Fan Switch: Fan switch for Automatic or Continuous fan operation.

program

day/time

reset

filter

prog day

hold /return

Filter Key: Resets Filter Change counter to zero.

Day / Time Key: Used for entering the Clock setting mode. Use with the Up and Down keys to set the time and day.

Hold / Return Key: Used for setting a permanent or vacation hold, and for returning to the normal display from Day & Time setting, Programming, or Span setting modes.

Reset: Press with a paper clip to reset the thermostat and return to power-up settings.

Program Day Key: Selects the day	Battery Release Lever:
or days to review or change in the	Push to pop batteries loose.
Program mode.