41644_model44360_web.pmd

14

PROGRAMMING

14

Setting Time and Day

■ The LCD will show this information when batteries

M

are first installed, or after the Reset button is

 

pressed. The temperature will update after a few

 

seconds.

 

■During time and day setting mode, the temperature and program displays will go blank.

■Example: Set the Thermostat to the current time of 2:16 pm on Saturday. Refer to the Steps below.

AM

4

TEMP

STEP 1:

 

■ Press to enter time and day setting mode. The cur-

 

day/time

M

 

 

rent hour and the AM / PM indicator will be flashing.

AM

 

 

■ Press to change the Hour up or down to the

 

 

 

current hour.

 

 

 

Note the AM / PM indicator, as the display will

 

 

 

change at 12 AM and 12 PM.

 

 

 

 

STEP 2:

 

■ Press again to change from hour setting to minute

 

 

day/time

 

M

 

 

setting. The current minute will be flashing.

 

PM

 

 

■ Press to change the Minute up or down to the

 

 

 

 

 

 

 

current minute.

 

 

 

 

 

 

 

15

STEP 3: day/time

■ Press again to change from minute setting to day

M

 

setting. The current day will be flashing.

PM

 

■ Press to change the Day up or down to the

 

 

 

current day.

 

 

 

 

STEP 4:

day/time

or

hold/return
■Press again to change back to the normal display.

SA

PM

2

TEMP

NOTE: You may press

hold

at any time during Day and Time setting to return to the

 

/return

 

 

normal display.

 

 

 

DAYLIGHT SAVING TIME

 

 

day/time

■ Press and hold.

SA SET TEMP

 

 

 

 

 

 

AM

 

■ Press to enter Daylight Saving Time.

2

or

 

 

TEMP

 

 

 

(continued)