Assembly
ENGLISH
[c] [a] [b]
7.Fasten Small Bolt [a] and Nylon Nut [b] using Small Allen Wrench [c] (included) and an adjustable wrench or pliers.
[a]
[b] 
9.Lower the Fan Assembly [a] onto the Tubes [b] of the base assembly. Slide down until it stops.
11.When not in use, please store cord on the back of the fan assembly as shown above.
[a]
8.Store the Small Allen Wrench [a] in the cover of the electrical box when not in use. This wrench can be used to adjust the tilt resistance (see page 7).
[a] | [a] |
10.Pull on Thumb Levers [a] to lower the Fan Assembly into the lowest / load carrying position.
44805 | [6] | 10/23/2008 |
