Operation
ADJUSTING HEIGHT OF FAN
•This fan has a special height adjustment feature allowing it to be placed near a standard height window.
1.Place you foot on the carrying ledge.
2.Pull in on thumb levers.
3.Raise fan assembly slightly and release levers so they will locate in the next hole.
4.Slowly raise or lower the fan to the desired position.
•The fan section can be raised and locked approx. 9" and 16" from the load carrying position.
ELECTRICAL BOX
•Grounded
•Circuit breaker protected with 7A overcurrent protection [a].
NOTE: If the breaker trips, unplug all cords and hit the reset button on the side of the box.
[a]
ADJUSTING
TILT RESISTANCE
1.The cover of the electrical box holds the small allen wrench needed for this operation.
2. To adjust tilt resistance locate | [a] |
fasteners on both sides of the fans |
|
[a]. |
|
• To increase tilt resistance - turn |
|
clockwise. |
|
• To decrease tilt resistance - turn |
|
| |
44805 | [7] |
[a]
10/23/2008
ENGLISH
