Manuals / Hunter Fan / Household Appliance / Fan

Hunter Fan installation manual 45043-01 10/19/09 Hunter Fan Company

Models: 45043-01

1 15
Download 15 pages 17.88 Kb
Page 10
Image 10
Manual background

7 • Completing Your Installation With a Bowl Light Fixture

Your Hunter fan comes with an integrated light fixture assembly.

Manual background WARNING: Use only the light fixture supplied with this fan model.

7-1. To attach the upper switch housing, partially install two housing assembly screws into the switch housing mounting plate.

7-2. Feed the upper plug connector through the center opening of the housing.

7-3. Align the keyhole slots in the housing with the housing assembly screws.

7-4. Turn the housing counterclockwise until the housing assembly screws are firmly situated in the narrow end of the keyhole slots. Install the remaining screw into the housing. Tighten all three screws firmly.

Manual background CAUTION: Make sure the upper switch housing is securely attached to the switch housing mounting plate. Failure to properly attach and tighten all three assembly screws could result in the switch housing and light fixture falling.

Steps 7-1 – 7-3

Housing

Assembly Upper

Screw Switch

Housing

10

45043-01 • 10/19/09 • Hunter Fan Company

Page 9 Page 11
Page 10
Image 10
Hunter Fan installation manual 45043-01 10/19/09 Hunter Fan Company
Page 9 Page 11

FAQ

What is included with the Hunter Fan model 45043-01?

The fan comes with an integrated light fixture assembly, and it is important to use only the light fixture supplied with this specific fan model.

How do I attach the upper switch housing?

Partially install two housing assembly screws into the switch housing mounting plate, feed the upper plug connector through the center opening of the housing, and align the keyhole slots in the housing with the housing assembly screws. Then, turn the housing counterclockwise until the screws are firmly situated in the narrow end of the keyhole slots and install the remaining screw.

What precautions should I take when attaching the upper switch housing?

It is crucial to ensure that the upper switch housing is securely attached to the switch housing mounting plate by properly attaching and tightening all three assembly screws, as failure to do so could result in the switch housing and light fixture falling.