Light Bulbs (B10 Candelabra Base 40 Watt Maximum)
7 • Completing Your Installation With a Light Fixture (Continued)
Installing the Glass Bowl
7-7. First install B10 candelabra bulbs (40 Watt Maximum) into the sockets.
7-8. Attach the extra pull chain (included) to the fan pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.)
7-9. Thread the fan pull chain through the hole in the metal disk. Then, thread the fan pull chain through the hole in the center of the glass bowl.
7-10. Thread the light pull chain through the hole in the center of the glass bowl.
7-11. Place the cover plate up against the glass bowl. Align the holes in the cover plate and glass bowl.
7-12. Thread the fan pull chain and light pull chain through the appropriate holes.
7-13. Thread the light pull chain through the finial and screw the finial onto the threaded rod end until tight.
Breakaway
Connector
Metal Disk
Glass Bowl
Cover Plate
Finial
45043-01 • 10/19/09 • Hunter Fan Company
