Hunter Fan 45049-01 installation manual Light/Speaker Assembly Installation

7 • Light/Speaker Assembly Installation

7-1. To attach the upper switch housing, partially install two housing assembly screws into the switch housing mounting plate.

7-2. Feed the upper plug connector through the center opening of the housing.

7-3. Align the keyhole slots in the housing with the housing assembly screws.

7-4. Turn the housing counterclockwise until the housing assembly screws are firmly situated in the narrow end of the keyhole slots. Install the remaining screw into the housing. Tighten all three screws firmly.

CAUTION: Make sure the upper switch housing is securely attached to the switch housing mounting plate. Failure to properly attach and tighten all three assembly screws could result in the switch housing fixture falling.

Steps 7-1 – 7-4

Housing

Assembly Upper

Screw Switch

Housing

11

45049-01 • 07/13/09 • Hunter Fan Company