Hunter Fan 45049-01 installation manual Glass Installation, Installing the Glass Bowl

8 •Glass Installation

Installing the Glass Bowl

8-1. Remove protective foam ring from threaded portion of light kit/speaker assembly.

8-2. Install B10 candelabra bulbs

(40 Watt Maximum) into the sockets.

8-3. Place the glass bowl over the

light kit/speaker assembly, ensuring the threaded portion of the light kit assembly comes out of the bottom of the glass bowl.

8-4. Place the finial over the threaded portion of the light kit/speaker assembly and twist it as shown to tighten it against the glass bowl.

Light Bulbs

(B10 Candelabra

Base 40 Watt

Maximum)

Finial

Threaded

Portion of

Light Kit

Assembly

Glass Bowl

Steps 8-2 - 8-4

8-5. Thread the fan pull chain through the pull chain guide.

Note: In compliance with US federal

energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation.

Breakaway

Connector

Fan Pull Chain

Pull Chain

Guide

Step 8-5

14

45049-01 • 07/13/09 • Hunter Fan Company