Hunter Fan 53069, 51011, 51010, 53070 Canopy, Holes, Screw, M0002-01 11/06/12 Hunter Fan Company

Models: 53066 53064 53069 53065 53070 51010 51011

1 17

Page 11

www.HunterFan.com

1.888.830.1326

Position the canopy so that, when lifted into place, the canopy fits into the hanging bracket as shown.

Lift the canopy into place so that

the screw holes are aligned.

Insert the two canopy screws

found in the

hardware bag.

Note: Fan style may vary.

Image 11

Contents

Wiring Table of ContentsWhat to Expect with Your Installation Switch Housing3 Longer Downrod What to Expect with Your Installation1 Standard Downrod 2 Shorter DownrodLadder Tools NeededWire Strippers Power Drill optionalUse Angled Mounting Mounting OptionsOPTION Use Standard Mounting or Low-ProfileMountingM0002-01 11/06/12 Hunter Fan Company Ceiling BracketUse wood screws Use machine screwsinstallation Ceiling Bracket continuedPreparation Remove the shipping blocks fromSteps 6-10to reassemble with new pipe DownrodOption Steps 1-5to remove standard downrod pipe3/8” Downrod continuedHAND TIGHTEN the canopy. Let the canopy sit loosely CANOPY OR WIRES. Place the downrodDownrod continued DO NOT PICK THE FAN UP BY THEILING WiringFor a Single Switch For Dual SwitchesM0002-01 11/06/12 Hunter Fan Company CanopyHoles ScrewBlades Switch Housing Light Kit Switch Housing Notch ScrewWant to install your fan without a light kit? Bulb Light Kit continuedSee next page for fan operation instructions ShadeMaintenance & Cleaning Noisy Operation TroubleshootingFan doesn’t work Excessive wobbling