Existing Construction – accessible from above
C11 | EXISTING FAN |
OR
NO EXISTING FAN
Remove an existing fan and check to make sure the | Use the motor housing as a template to mark position. |
opening is large enough to accommodate the new |
|
motor housing (8”x 8.5”). |
|
|
|
| ” |
8 |
| 5 | |
. |
| ||
” | 8 |
|
|
|
|
| |
Cut out an opening for the housing.
C13
5/8 | 5/8 | |
1/2 | ||
1/2 | ||
|
C12 |
E |
D |
Slide the mounting rails into brackets.
C14
Position the correct depth mark at the bottom edge of the
joist based on the thickness of your sheetrock.
41719_EngS_3.29.06.indd 11
Mark position of screws by using holes as a template.
11
3/29/06 9:16:42 PM
