8 41746-01 05/02/2005
ENGLISH
OPERATION
This appliance is for household use
only.
1. Place the fan on a dry, safe, fl at
sur face where it cannot fall or
be pulled by the cord.
2. Plug the fan into a grounded
120-volt AC electrical outlet
(or di nary household current).
DO NOT use any other type of
outlet. Make sure that the rated
voltage of the fan is the same as
the power source before plug-
ging it into the power source.
3. Turn the fan “ON” or “OFF”
by rotating clockwise or coun-
ter clock wise the Pow er/Speed
Con trol. The pow er should al-
ways be OFF be fore un plug ging
the fan.
4. To select the speed, move the
Pow er/Speed Control from OFF
to the desired speed setting:
O (off), I (low), II (medium), III
(High).
5. To control the upward and
down ward direction of air fl ow,
loosen the screw on the side of
the fan housing neck. Adjust to
the desired angle and tighten
the screw.
6. To make the fan oscillate, push
the oscillation knob down. To
stop oscillating, pull the os cil -
la tion knob up. The oscillation
knob is located on the top of the
fan hous ing, near the handle.
7. To adjust the height of your
fan, while holding the top pole
securely with one hand, loosen
the grip on the telescoping pole
by twisting counterclockwise.
While supporting the fan motor,
raise or lower the top pole to
suit your needs. Tighten the grip
on the pole by twisting clock-
wise until it stops.
41746_CentFan_04.29.05.indd 8 5/2/05, 10:51:05 AM