42733-01 04/26/2007 13
ENGLISH
®
HuNTEr FaN CoMpaNy
2500 FrISCo aVENuE
MEMpHIS, TN 38114, uSa
printed in China
SToraGE TrouBLESHooTING
proBLEM
• Fan will not work.
SoLuTIoN
• Make sure the Interlock Bracket is
properly installed as directed in the
assembly instructions. See page 9.
proBLEM
• Fan will not oscillate.
SoLuTIoN
• push down the oscillation pin on
top of motor housing to activate
oscillation. See page 11.
proBLEM
• Can not adjust the angle of the
fan.
SoLuTIoN
• Loosen the angle adjustment
knob on the side of the fan neck.
adjust to the desired angle and
tighten the knob. See page 11.
If you have tried these trouble-
shooting solutions and still have
trouble, visit our web site at http:
//www.hunterfan.com.
1. To store the fan, disassemble
the Front and Back Grilles,
remove the Blade assembly,
and clean the entire fan with a
damp cloth.
2. aLwayS store the fan in a dry
place.
3. NEVEr store the fan while it is
still plugged in.
4. NEVEr wrap the cord tightly
around the fan.
5. do NoT put any stress on the
cord where it enters the fan, as
it could cause the cord to break.
©2007 Hunter Fan Co.