Hunter Fan 45032-01, Type 7 Models installation manual Installing the Glass Bowl

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Installing the Glass Bowl

7-8.	First install candelabra bulbs (60 Watt Maximum) into the sockets.
7-9.	If the fandangle is attached to the extra pull chain, remove it now.
7-10.	Thread the fan pull chain through the hole in the metal disc. Then,
	thread the fan pull chain through the hole in the center of the glass
	bowl.
7-11.	Thread the light pull chain through the hole in the center of the
	glass bowl. Then, Thread the light pull chain through the hole in
	the center of the cover plate.
7-12.	Thread the fan pull chain through the grommet hole in the side of
	the cover plate.
7-13.	Place the cover plate up against the glass bowl. Align the holes in
	the cover plate and glass bowl.
7-14.	Thread the light pull chain through the finial and screw the finial		Light Bulb
	onto the threaded rod end until tight.		Sockets
7-15.	Reattach the fandangle to the extra pull		(60 Watt
			Maximum)
	chain.
			Metal Disc
			Metal Rod
			Glass Bowl
			Cover Plate
		Breakaway	Finial
		Connector

13

45032-01 • 11/05/08 • Hunter Fan Company