Care and Maintenance

 

Buckle Removal

 

1 Locate the metal buckle strap

 

retainer on bottom of the

 

restraint.

 

2 Pull retainer away from child

 

restraint to loosen.

A

3 Turn the retainer so that the

 

short side will go through the slot in the restraint shell (Fig. A).

Cleaning the Buckle

If your child eats and drinks while in the restraint, you may need to check the buckle periodically and wash out any accumulated debris or dried liquids.

THOROUGHLY RINSE, using warm water (Fig. B).

Care and Maintenance

B

4 Push the retainer through slots in the shell and cover, to the front of the restraint.

Rethreading the Buckle

1

Locate the necessary buckle slot.

2

Turn the buckle retainer so that the short side will go through

the slot in the cover and restraint shell (Fig. A).

3

Pull buckle away from restraint until tight, then verify that the

strap is not twisted and the release button is facing out.

4

Verify that the buckle retainer lies flat against the the restraint

shell.

SOAK, overnight if possible, using warm water to loosen hardened drinks or food.

TEST THE BUCKLE, by fastening and unfastening until a positive click is heard after inserting the second buckle tongue (Fig. C). If click is not heard, repeat leaning procedure.

TOWEL DRY

Unbuckle Buckle

C

DO NOT:

Lubricate

Use solvents

Use soap or household detergents

28

29

Page 16
Image 16
Husky Baby Carrier manual Buckle Removal, Cleaning the Buckle, Rethreading the Buckle