GLOSSARY

Become familiar with these terms before operating the unit. CFM: Cubic feet per minute.

SCFM: Standard cubic feet per minute; a unit of measure of air delivery.

PSIG: Pounds per square inch gauge; a unit of measure of pressure.

Code Certification: Products that bear one or more of the following marks: UL, CUL, ETL, CETL, have been evaluated by OSHA certified independent safety laboratories and meet the applicable Underwriters Laboratories Standards for Safety.

Cut-In Pressure: While the motor is off, air tank pressure drops as you continue to use your accessory. When the tank pressure drops to a certain low level the motor will restart automatically. The low pressure at which the motor automatically restarts is called “cut-in” pressure.

Cut-Out Pressure: When an air compressor is turned on and begins to run, air pressure in the air tank begins to build. It builds to a certain high pressure before the motor automatically shuts off - protecting your air tank from pressure higher than its capacity. The high pressure at which the motor shuts off is called “cut-out” pressure.

Branch Circuit: Circuit carrying electricity from electrical panel to outlet.

DUTY CYCLE

This air compressor pump is capable of running continuously. However, to prolong the life of your air compressor, it is recommended that a 50%-75% average duty cycle be maintained; that is, the air compressor pump should not run more than 30-45 minutes in any given hour.

SPECIFICATIONS

 

Model No.

Y6010

Horsepower Peak

3.0

Bore

1.875"

Stroke

1.25"

Voltage-Single Phase

120V

* Minimum Branch Circuit Requirement

15 amps

* * Fuse Type

Time Delay

Air Tank Capacity - (gallon)

25

Approximate Cut-in Pressure

120 PSIG

Approximate Cut-out Pressure

150 PSIG

SCFM @ 40 PSIG

4.9

SCFM @ 90 PSIG

3.5

* These compressors can be operated on a 15 amp circuit if:

1.Voltage supply to circuit must comply with the National Electrical Code.

2.Circuit is not used to supply any other electrical needs (lights, appliances, etc.)

3.Extension cords comply with specifications in owners manual.

4.Circuit is equipped with 15 amp circuit breaker or 15 amp time delay fuse.

If any of the above conditions cannot be met, or if operation of the compressor repeat- edly causes interruption of the power it may be necessary to operate it from a 20 amp circuit. It is not necessary to change the cord set.

**A circuit breaker is preferred. Use only a fuse or circuit breaker that is the same rating as the branch circuit on which the air compressor is operated. If compressor is connected to a circuit protected by fuses, use only time delay fuses. Time delay fuses should be marked "D" in Canada and "T" in the US.

D28752

8- ENG

Page 7 Page 9
Page 8
Image 8
Husky D28752 manual Glossary, Duty Cycle, Specifications, Model No Y6010
Page 7 Page 9

D28752 specifications

Husky D28752 is a cutting-edge machine, renowned for its advanced design and robust functionality in the field of industrial automation. This model exemplifies Husky's commitment to innovation, catering to diverse industries such as packaging, automotive, and consumer goods.

A standout feature of the Husky D28752 is its exceptional speed. It is engineered to optimize production lines, achieving high output rates without compromising on quality. This efficiency is largely attributed to its state-of-the-art injection molding technology, which allows for precise control over the molding process, resulting in reduced cycle times.

The D28752 incorporates advanced automation technologies, enhancing its operational capabilities. With integrated robotics, the machine can perform complex tasks with minimal human intervention. This not only increases productivity but also reduces labor costs and the potential for errors. The automation is complemented by an intuitive user interface, designed for operators to easily monitor and adjust settings in real-time.

Reliability is another hallmark of the D28752. Built with durable materials, the machine is designed to withstand the rigors of continuous operation. Its robust construction minimizes the likelihood of breakdowns, ensuring that production schedules remain on track. Additionally, the D28752 features predictive maintenance capabilities, utilizing data analytics to anticipate potential issues before they arise.

The machine is also highly versatile, accommodating various molds and materials. This flexibility makes it an ideal choice for companies looking to diversify their product offerings without investing in multiple machines. The D28752 supports a range of thermoplastics and is compatible with both standard and custom molds, allowing for significant customization in production.

Energy efficiency is a core principle in the design of the Husky D28752. Its engineering minimizes energy consumption, leading to both cost savings and a reduced environmental footprint. By incorporating energy-saving technologies, the machine meets the increasing demand for sustainable manufacturing practices.

In summary, Husky D28752 stands out as a machine that combines speed, reliability, and versatility with cutting-edge technology. Designed with the future of manufacturing in mind, it addresses the key challenges faced by modern industries, making it a valuable asset for companies striving for excellence in production.
Top Page Image Contents