ASSEMBLY
WARNING:
If any parts are damaged or missing do not operate this | BUTTON | |
tool until the parts are replaced. Failure to heed this warn- | ||
| ||
ing could result in serious personal injury. |
|
WARNING:
Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
HANDLE TUBE
WARNING:
To prevent accidental starting that could cause serious personal injury, always disconnect the engine spark plug wire from the spark plug when assembling parts.
NOTE: Do not start the pressure washer until the engine has been filled with oil, all hoses are connected, and the water is turned on. Running this machine without oil will damage the engine; running this machine without water will damage the high pressure pump.
RAISING AND LOWERING THE TELESCOPING
HANDLE
See Figure 2.
NEVER lift, or attempt to lift, the pressure washer by the telescoping handle. Only lift this product using the carrying handles located on each side of the unit.
To raise the handle, push the button while pulling the handle up and out of the handle tube.
NOTE: The handle will “click” as it locks in place.
To lower the handle, push the button while pushing the handle down into the handle tube.
HANDLE
Fig. 2
9
