Husqvarna 1153179-26 manual

EEnn

nngg

ggll

llii

iiss

sshh

357XP/XPG

, 357XP E-tech

357XPG E-tech

359/G, 359 E-tech, 359G E-tech

Oper

ator

′

s manual

Please r

ead the operator’s manual carefully and make sure you understand the instructions before using the

machine.

Contents

Main KEY T O SYMBOLS Symbols on the mac hine: CONTENTS Contents INTR ODUCTION Dear Customer , WHA T IS WHA T? GENERAL SAFETY PRECA UTIONS Impor Bef ore using a new chain saw GENERAL SAFETY PRECA UTIONS ont hand guard Chain brake and fr s safety equipment Page Will my hand always activate the chain brake during a kickback? Will my inertia activated chain brake always activate during kickback in the event of a kickback? Will my chain brake always protect me from injury in the event of a kickback? Throttle lockout Chain catcher Cutting equipment General rules Cutting equipment designed to reduce kickback Sharpening your chain and adjusting depth gauge setting Tensioning the chain Lubricating cutting equipment Page Page ASSEMBLY Fitting the bar and chain Fitting a spike bumper FUEL HANDLING Fuel Petrol Two-stroke oil Mixing FUEL HANDLING Fuelling Fuel safety Transport and storage Long-term storage STARTING AND STOPPING Starting and stopping A Cold engine Warm engine STARTING AND STOPPING Stopping Before use: , General working instructions Basic safety rules General rules Basic cutting technique Page Tree felling technique Page Freeing a tree that has fallen badly How to avoid kickback What is kickback? General Carburettor adjustment Carburettor with movement limiters LH T Low speed jet L Fine adjustment of the idle speed T High speed jet H Correctly adjusted carburettor LH T Fine adjustment H Conditions L Low speed jet L Fine adjustment of the idle speed T Checking, maintaining and servicing chain saw safety equipment Chain brake and front hand guard Throttle lockout Chain catcher Right hand guard Vibration damping system Stop switch Mufer Starter Changing a broken or worn starter cord Tensioning the recoil spring Changing a broken recoil spring Air lter Spark plug Lubricating the bar tip sprocket Needle bearing lubrication Adjustment of the oil pump Cooling system Heated handles Electrical carburettor heating Maintenance schedule English 41 Technical data 357XP 359 Bar and chain combinations Saw chain ling and le gauges EC-declaration of conformity (Applies to Europe only)