WORKING TECHNIQUES

Felling

 

!

WARNING! Unless you have special

training we advise you not to fell trees

 

with a diameter larger than the bar length

 

of your saw!

Felling is done using three cuts. First you make the directional cuts, which consist of the top cut and the bottom cut, then you finish with the felling cut. By placing these cuts correctly you can control the felling direction very accurately.

Directional cuts

To make the directional cut you begin with the top cut. Aim using to the saw’s felling direction mark (1) toward a goal further forward in the terrain, where you would like the tree to fall (2). Stand on the right-hand side of the tree, behind the saw, and cut with a pull stroke.

Next make the bottom cut so that it finishes exactly at the end of the top cut.

The directional cuts should run 1/4 of the diameter through the trunk and the angle between the top cut and bottom cut should be 45°.

The line where the two cuts meet is called the directional cut line. This line should be perfectly horizontal and at right angles (90°) to the chosen felling direction.

Felling cut

The felling cut is made from the opposite side of the tree and it must be perfectly horizontal. Stand on the left side of the tree and cut on the pull stroke.

Make the felling cut about 3-5 cm (1.5-2 inches) above the bottom directional cut.

Set the spike bumper (if one is fitted) just behind the felling hinge. Use full throttle and advance the chain/bar slowly into the tree. Make sure the tree does not start to move in the opposite direction to your intended felling direction.

Drive a wedge or breaking bar into the cut as soon as it is deep enough.

Finish the felling cut parallel with the directional cut line so that the distance between them is at least 1/10 of the trunk diameter. The uncut section of the trunk is called the felling hinge.

The felling hinge controls the direction that the tree falls in.

All control over the felling direction is lost if the felling hinge is too narrow or non-existent, or if the directional cuts and felling cut are badly placed.

When the felling cut and directional cut are complete the tree should start to fall by itself or with the aid of a felling wedge or breaking bar.

We recommend that you use a bar that is longer than the diameter of the tree, so that you can make the felling cut and directional cuts with single cutting strokes. See instructions under the heading Technical data section to

English – 27

Page 26 Page 28
Page 27
Image 27
Husqvarna 1153179-26 manual Training we advise you not to fell trees, Your saw, Directional cuts, Felling cut
Page 26 Page 28

1153179-26 specifications

The Husqvarna 1153179-26 is a powerful and efficient lawn mower designed for homeowners who seek a balance of performance and ease of use. One of the standout features of this model is its lightweight and compact design, making it easy to maneuver around your garden or yard. With a robust engine, it offers reliable performance, delivering the power needed to tackle various types of grass and terrain with ease.

Equipped with a cutting width of 26 inches, the Husqvarna 1153179-26 allows for efficient mowing over larger areas while still being able to navigate tight spots effectively. The adjustable cutting height adds to its versatility, enabling users to choose the perfect length for their lawns, whether they prefer a manicured look or a more natural appearance.

The mower incorporates advanced technologies that enhance its performance and user experience. The Smart Start feature enables quick and easy starting of the engine with minimal effort, so you can get to mowing without wastefully pulling on a cord multiple times. The air injection system ensures that the air filter remains clean, thereby prolonging the life of the engine and reducing maintenance needs.

Another excellent feature of the Husqvarna 1153179-26 is its ergonomic handle design, which allows for comfortable operation, reducing fatigue during extended mowing sessions. This is particularly beneficial for homeowners with larger properties who have to spend considerable time tending to their lawns.

Durability is a key characteristic of this model, as it features a sturdy construction designed to withstand the rigors of frequent use. The mower's materials are engineered to resist wear and damage, ensuring longevity and reliability.

Additionally, the Husqvarna 1153179-26 has a mulching capability, allowing you to recycle grass clippings back into your lawn, promoting healthier growth and reducing waste. This eco-friendly feature not only improves your lawn’s health but also minimizes the need for bagging and disposal.

In conclusion, the Husqvarna 1153179-26 combines portability, power, and advanced technology to provide an exceptional mowing experience. Its lightweight design, powerful engine, and user-friendly features make it an excellent choice for homeowners looking to maintain a beautiful lawn with ease.
Top Page Image Contents