MAINTENANCE
Maintenance schedule
The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carry out the main- tenance and service work described in this Operator’s Manual. More extensive work must be carried out by an authorised service workshop.
| Maintenance | Daily | Weekly | Monthly |
|
| Maintenance Maintenance | Maintenance |
| ||
|
|
| |||
| Clean the outside of the machine. |
| X |
|
|
| Make sure the throttle trigger lock and the |
|
|
|
|
| throttle function correctly from a safety point |
| X |
|
|
| of view. |
|
|
| |
| Check that the stop switch works correctly. |
| X |
|
|
| Check that the cutting attachment does not |
|
|
|
|
| rotate at idle. |
| X |
|
|
| Clean the air filter. Replace if necessary. |
| X |
|
|
| Check that the guard is undamaged and not |
|
|
|
|
| cracked. Replace the guard if it has been |
|
|
|
|
| exposed to impact or is cracked. |
| X |
|
|
| Check that the trimmer head is undamaged |
|
|
|
|
| and not cracked. Replace the trimmer head |
|
|
|
|
| if necessary. |
| X |
|
|
| Check that the locking nut of the cutting |
|
|
|
|
| equipment is tightened correctly. |
| X |
|
|
| Check that nuts and screws are tight. |
| X |
|
|
| Check that there are no fuel leaks from the |
|
|
|
|
| engine, tank or fuel lines. |
| X |
|
|
| Check the starter and starter cord. |
| X |
|
|
| Clean the outside of the spark plug. Re- |
|
|
|
|
| move it and check the electrode gap. Adjust |
|
|
|
|
| the gap to 0,6 mm or replace the spark plug. |
|
|
|
|
| Check that the spark plug is fitted with a |
|
|
|
|
| suppressor. |
| X |
|
|
| Clean the outside of the carburetor and the |
|
|
|
|
| space around it. |
| X |
|
|
| Check that the bevel gear is filled |
|
|
|
|
| quarters full with lubricant. Fill if necessary |
|
|
|
|
| using special grease. |
| X |
|
|
| Check the fuel filter from contamination and |
|
|
|
|
| the fuel hose from cracks or other defects. |
|
| X |
|
| Replace if necessary. |
|
|
| |
| Check all cables and connections. |
|
| X |
|
| Check the clutch, clutch springs and the |
|
|
|
|
| clutch drum for wear. Replace if necessary |
|
|
|
|
| by an autorized service workshop. |
|
| X |
|
| Replace the spark plug. Check that the |
|
|
|
|
| spark plug is fitted with a suppressor. |
|
| X |
|
| Clean or replace the spark arrestor mesh |
|
|
|
|
| on the muffler. |
|
| X |
|
23