MAINTENANCE | |
GENERAL RECOMMENDATIONS | LUBRICATION CHART |
The warranty on this snow thrower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain snow thrower as instructed in this manual. Some adjustments will need to be made periodically to properly maintain your snow thrower.
All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.
•Once a year, you should replace the spark plug and check belts for wear. A new spark plug will help your engine run better and last longer.
•Follow the maintenance schedule in this manual.
NOTE: Use only Original Equipment Manufacturer (OEM) parts to service this unit. Failure to do so can cause the unit to malfunction and pose a risk of injury to the operator.
BEFORE EACH USE
1. Check engine oil level.
2. Check for loose fasteners.
3. Check controls to be sure they are functioning properly.
LUBRICATION
Keep your snow thrower well lubricated (See “LUBRICATION CHART”).
SNOW THROWER
Always observe safety rules when performing maintenance.
TIRES
•Maintain proper air pressure in both tires
•Keep tires free of gasoline / oil, which can harm rubber.
NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion. 14
➀SAE 30 Motor Oil
➁ See “ENGINE” in
Maintenance section
➂ General
Purpose
Grease
➀ Pivot points
➁
| Engine |
➂ Auger | oil |
| |
grease fittings |
|
BELTS
Check belts for deterioration and wear after every 50 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. (See “TO REMOVE BELT COVER” in the Service and Adjustments section of this manual).
