FujiFilm XP30 owner manual After Use, Storageand Maintenance

• After Use

':!) Remove any foreign matter from the water-resistant seal and adjacent surfaces. Foreign mat- ter could damage the seal, lowering water resistance.

':!) After using the camera underwater or in locations where foreign matter might adhere to the camera body, rinse the camera under the tap or leave it in a basin of flesh water for two to three minutes.

':!) Liquid soaps, detergents, alcohol, and other cleansers may affect water resistance and should never be used.

':!) After use, remove water droplets and foreign matter with a dry cloth, firmly latch the battery- chamber cover, and soak the camera in fresh water for about ten minutes. Dry the camera thoroughly after removing it from the water.

•Storageand Maintenance

':!'_Do not store at temperatures below 0 °C (32 °F) or above 40 °C (104 °F).

':!) To ensure continued water resistance, it is recommended that you have the water-resistant seal replaced about once a year (a fee is charged for this service). Contact your retailer or a FUJIFILM-authorized repair technician for more information.

•ColdClimates

':!)Battery performance drops at low temperatures, reducing the number of pictures that can be taken. Insulate the camera to keep it warm or place it in your clothing.

':!) Use an NP-45A battery.

':!) Display response may slow at low temperatures.This is not a malfunction.

_V