MAINTENANCE

Air filter

Maintenance schedule

The air filter (A) should be cleaned regularly removing dust and dirt to avoid:

Below follows some general maintenance instructions.

If you need further information please contact your service workshop.

carburettor malfunction

starting problems

reduced engine power

unnecessary wear to engine parts

abnormal fuel consump- tion

Clean the filter after every 25 hours or more regularly if operating conditions are exceptionally dusty.

A

B

Daily maintenance

1.

Clean the outside of the

 

machine.

2.

Make sure the throttle

 

trigger lock and the

 

throttle function

 

correctly from a safety

 

point of view.

3.

Check that the stop

1

2

Cleaning the air filter

Dismantle the air filter cover (B) and remove the air filter. Wash in clean, warm soapy water. Ensure that the filter is dry before refitting.

An air filter used for a long period of time can never be cleaned completely. Therefore it is necessary to replace the filter from time to time with a new filter. A damaged air filter must always be replaced.

Spark plug

The condition of the spark plug is affected by:

An incorrect carburettor setting.

An incorrect fuel mixture (too much or faulty oil).

A dirty air filter.

These factors cause deposits on the spark plug electrode that may result in malfunction or starting difficulties.

 

switch functions.

4.

Check that the cutting

 

attachment does not

 

move when the engine is

 

idling.

5.

Clean the air filter.

 

Replace if necessary.

6.

Check that the transport

 

guard is not damaged.

 

Replace the guard if it is

 

damaged.

7.

Check that all nuts and

 

screws are tightened.

3

4

5

If the machine is low on power, difficult to start or runs poorly while idling always check the spark plug first before taking other action.

The spark plug is accessed from under the cylinder cover, which is removed by loosening the four bolts (A).

If the spark plug is dirty, clean it and at the same time check that the electrode gap is 0.5 mm. The spark plug should be changed after about one month of operation or earlier if necessary.

NOTE! Always use the recommended type of spark plug. An incorrect spark plug can damage the cylinder/piston.

A

A

0,5 mm

6

7

English – 15

Page 15
Image 15
Husqvarna 225AI15/AI25 manual Air filter Maintenance schedule, Spark plug, Daily maintenance, Cleaning the air filter