SAFETY INSTRUCTIONS
Protective instructions when work is completed
•The transport guard must always be fitted to the cutting attachment when the machine is not in use.
•Ensure the cutting attachment has stopped and remove the spark plug cable from the spark plug before carrying out cleaning, repairs or inspection.
•Always wear heavy gloves
when replacing the cutters. The cutters are extremely sharp and can easily cause cuts.
• Store the machine out of reach from children.
•Only use original spare
parts when carrying out repairs.
Basic working techniques
•Make sure you have a safe and steady working
position.
• Always use both hands to hold the machine.
• Place the tip of the drill on the ice.
•Open the throttle gradually when the drill begins to bite into the ice.
•Keep a firm grip on the handles and be ready to take the weight when the drill tip goes through the ice.
• When you have finished drilling for the time being, drill a short distance into the ice so that the machine stands up by itself. By leaving the machine like this you reduce the risk of anyone accidentally coming into contact with the cutters.
•Always turn off the engine when you have finished drilling.
Fitting the auger
•Fit the auger (A) to the output shaft (B).
•Fit the screws (C) and tighten using the Allen key provided.
B |
C |
A |
English – 9
