SAFETY INSTRUCTIONS
1. Throttle trigger lock
•Check that the throttle is locked in the “idling
position“ when the throttle trigger lock is in its original position.
• Press in the throttle trigger lock and make sure it returns to its original position when released.
• Ensure that the throttle and throttle trigger lock move easily and that their return spring systems function.
• See the section ”Start”. Start the machine and apply full throttle.
Release the throttle and check that the cutting attachment stops and remains stationary. If the cutting attachment continues to move when the throttle is in the idle position then the carburettor idle setting must be adjusted.
See the chapter “Maintenance”.
2. Stop switch
•Start the engine and make sure that the engine stops when the stop
switch is moved to the stop position.
3. Muffler
•Never use a machine that has a defective muffler.
•Check regularly that the muffler is secure.
•If your muffler is fitted with a spark arrest screen then it should be cleaned regularly. A blocked screen leads to the engine overheating with serious damage as a result. Never use a muffler with a defective spark arrest screen.
4. Cutters
•Ensure that the cutters are securely attached.
•When the blade is manufactured it is sharpened using an advanced method. This means that the blade cannot be
5. Transport guard
•Regularly check that the transport guard is not damaged.
•Replace the transport guard if it is damaged.
6 – English
