INTRODUCTION
Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice.
This operator’s manual describes in detail how to use and service the blower and how to carry out regular maintenance. It also describes which meas- ures should be taken to achieve maximum safety while operating the blower, how the safety devices work and how they should be serviced.
Note! The section of the manual that deals with safety, must be read and understood by all persons who come in contact with the blower.
This operator’s manual has been written for those who need guidance when it comes to fault tracing, thorough servicing and carrying out corrective maintenance of the blower.
There are warning symbols on the blower. These are illustrated on page 3. Should any of the warning symbols on the blower become disfigured or worn, new ones should be ordered and fitted to the blower as soon as possible. Note that some of the warning symbols are molded in certain components of the blower.
The blower is used for blowing away leaves and other debris on the ground. When operating the blower, the operator must stand with both feet firmly on the ground.
This decal certify that the product has been approved in accordance with American exhaust emission requirements EPA 1 and CARB 95.
!WARNING!
Under no circumstances may the design of the machine be modified without the permission of the manufacturer. Always use genuine accessories.
Your warranty does not cover damage or liability caused by the use of
