Husqvarna manual Technical Data, Technical data 225H60 225H75

TECHNICAL DATA

Technical data	225H60	225H75
Engine
Cylinder capacity, cu. in/cm3	1,55/25,4	1,55/25,4
Cylinder bore, inch/mm	1,34/34	1,34/34
Stroke length, inch/mm	1,10/28	1,10/28
Idling speed, rpm	2 700	2 700
Recommended max. speed, rpm	11 000-11 700	11 000-11 700
Max. engine output, acc. to ISO 8893	0,9 kW/ 9 000 rpm	0,9 kW/ 9 000 rpm
Catalytic converter muffler	Yes	Yes
Speed-regulated ignition system	Yes	Yes
Ignition system
Manufacturer/type of ignition system	Walbro MB/CD	Walbro MB/CD
Spark plug	Champion RCJ 7Y	Champion RCJ 7Y
Electrod gap, inch/mm	0,02/0,5	0,02/0,5
Fuel lubrication system
Manufacturer/type of carburettor	Walbro WT	Walbro WT
Fuel tank capacity, US pint/ litres	0,85/0,4	0,85/0,4
Weight
Weight without fuel, Lbs/kg	12,1/5,5	12,6/5,7
Noise emissions (see note 1)
Sound power level, measured dB(A).	106	106
Sound power level, guaranteed LWA dB(A).	109	109
Sound levels (see note 2)
Equivalent sound pressure levels at the user’s ear,
measured acc. to EN ISO 11806 and ISO 7917,
dB(A):	95,1	95,1
Vibration levels
Vibration levels on the handles measured acc. to
EN ISO 11806 and ISO 7916, m/s2
Idling, rear/front handles:	2,3/2,0	2,2/1,5
Max. speed , rear/front handles:	3,0/2,3	2,2/1,5
Blades (double sided)
Length, mm	600	750
Blade speed, cut/min	2 480	2 480

Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC.

Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various

working conditions with the following time distribution: 1/2 idling and 1/2 max speed.

EC declaration of conformity (Applies to Europe only)

Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46 36-146500, declare under sole responsibility that the hedge trimmers Husqvarna 225H60 and 225H75 with serial numbers from year 2002 and onwards (the year is clearly stated in plain text on the type plate with subsequent serial number), are in conformity with the following standards or other normative documents following the provisions in the COUNCIL’S DIRECTIVE:

-of June 22 1998 “relating to machinery” 98/37/EC, annex IIA.

-of May 3 1989 “relating to electromagnetic compatibility” 89/336/EEC, and applicable supplements.

-of May 8, 2000 “relating to noise emissions in the environment” 2000/14/EC.

For information relating to noise emissions, see the chapter Technical data.

The following standards have been applied: EN292-2, CISPR 12:1997, EN774.

SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has performed voluntary type examination on behalf of Husqvarna AB. The certificates are numbered: SEC/96/310, 01/094/006 – 225H60, SEC/96/311, 01/094/006 – 225H75.

Huskvarna 3 January 2002

Bo Andréasson, Development manager.

English – 19