Husqvarna 233RJ manual Technical Data, Technical data

TECHNICAL DATA
Technical data
	233RJ
Engine
Cylinder displacement, cm3	29,5
Cylinder bore, mm	38,0
Stroke, mm	26
Idle speed, rpm	3000
Recommended max. speed, rpm	12000
Speed of output shaft, rpm	8220
Max. engine output, acc. to ISO 8893	1,0/8000
Catalytic converter muffler	No
Ignition system
Manufacturer/type of ignition system	Ikeda Denso /
	Oppama
Spark plug	NGK CMR7H-10
Electrode gap, mm	0,9-1,0
Fuel and lubrication system
Manufacturer/type of carburettor	Walbro WYA
Fuel tank capacity, litre	0,75
Weight
Weight without fuel, cutting attachment and guard, kg	5,5
Noise emissions
(see note 1)
Sound power level, measured dB(A)	111
Sound power level, guaranteed LWA dB(A)	112
Noise levels

(see note 2)

Equivalent noise pressure level at the operator's ear,

measured according to EN ISO 22868, dB(A), min./max.: 94/98

Vibration levels
Vibration levels at handles, measured according to
EN ISO 22867, m/s2
At idle, left/right handles, min.:	1,7/0,9
At idle, left/right handles, max.:	2,0/1,6
At max. speed, left/right handles, min.:	1,9/2,1
At max. speed, left/right handles, max.:	9,9/5,1

Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/ EC.

Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under

various working conditions with the following time distribution: 1/2 idling and 1/2 max speed.

NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cutting attachments for the machine. The table indicates the lowest and highest values.

English – 199