CONTENTS
Before using your new Power cutter
•Read the Operator’s Manual carefully.
•Check the assembly and adjustment of the cutting blade, see chapter ”Assembly”.
•Start the engine and check the carburettor settings. See chapter ”Maintenance”, section ”Carburetor”. When adjusted correctly the cutting blade should not rotate when idling. Setting the idling speed is described in the Operator’s Manual. Adjust the speed according to these instructions. Do not use the power cutter if the idling speed is not correctly adjusted!
•Let your Husqvarna dealer check the power cutter and carry out essential adjustments and repairs.
Maintenance, replacement, or repair of the emission control devices and systems may be performed by any nonroad engine repair establishment or individual.
!WARNING!
Under no circumstances should you modify the original design of the power cutter without approval from the manufacturer. Always use genuine spare parts. Unauthorized modifications or accessories may lead to serious injury or death.
Your warranty does not cover damage or liability caused by the use of
!WARNING!
Use of products which cut, grind, drill, sand or shape material can generate dust and vapors which may contain harmful chemicals. Know the nature of the material being worked on and wear appropriate dust mask or respirator protection.
You will find the following label on your power cutter:
WARNING 
Cutters can be dangerous !
For safe operation follow all safety precautions in
operator´s manual.
Only trained and qualified personnel shall operate this cutter.
Only use high speed reinforced wheels approved for free - hand cutting and for the maximum speed rating of cutter.
Before each use, check wheel and guard for any damage.
Use ear, eye, head and hand protectors, protective clothing and protective footwear.
Keep all bystanders well away from the operating area. 
Adjust guard to keep rear section in close workpiece contact.
IMPORTANT ENGINE INFORMATION 
3120K 119cc VHV119UB25RB
HUSQVARNA AB HUSKVARNA SWEDEN
THIS ENGINE CONFORMS TO 1997 U.S. EPA EMISSION REGULATION FOR SMALL NONROAD ENGINES. REFER TO OPERATOR´S MANUAL FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
List of Contents |
|
Symbol explanation | 2 |
Safety instructions |
|
Personal protective equipment | 4 |
The power cutter’s safety equipment | 4 |
Control, maintenance and service of the machine‘s safety |
|
equipment | 4 |
General safety instructions | 6 |
Transport and storage | 6 |
Fuel safety | 7 |
General working instructions | 7 |
Cutting | 7 |
Kickback | 8 |
Care and storage | 9 |
Cutting blades | 10 |
General | 10 |
Abrasive blades | 10 |
Diamond blades | 11 |
What is what? |
|
What is what on a power cutter? | 12 |
Assembly |
|
Fitting the cutting head | 13 |
Checking the drive shaft and flanges | 13 |
Fitting the cutting blade | 13 |
Fuel handling |
|
Fuel mixture | 14 |
Fuelling | 14 |
Start and stop |
|
Start and stop | 15 |
Maintenance |
|
Adjusting the drive belt | 16 |
Changing the drive belt | 16 |
Carburettor | 17 |
Fuel filter | 18 |
Air filter | 18 |
Starter | 19 |
Muffler | 20 |
Spark plug | 20 |
Cooling system | 20 |
Daily maintenance | 21 |
Weekly maintenance | 21 |
Monthly maintenance | 21 |
Technical Data |
|
3120K | 22 |
Emission Control Warranty Statement |
|
Your warranty rights and obligations | 23 |
Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice.
English – 3
