MAINTENANCE
Muffler with catalytic converter
A muffler fitted with a catalytic converter reduces the extent of the following substances in the exhaust fumes:
•Hydrocarbons (HC). Some hydrocarbons in gasoline and the exhaust are carcinogenic.
•Nitric oxides (NO). Irritating for the breathing
•Aldehydes. The most common formaldehyde, is carcinogenic and causes hypersensitiveness.
NOTE! The level of carbon monoxide is not reduced. This is an odourless and extremely poisonous substance. Therefore avoid exposure without good air circulation.
The muffler is designed to dampen the noise level and to direct the exhaust fumes away from the user. The exhaust fumes are hot and can contain sparks, which can result in fire if the exhaust fumes are di- rected towards a dry or inflam- mable material. Some mufflers are fitted with a special spark arrest screen. If your machine is fitted with this type of muf- fler then the screen should be cleaned at least once a week. This is done using a wire brush. If the screen is dam- aged in anyway it should be re- placed. If the screen is blocked this will result in the engine overheating and damage to the cylinder and piston,
NOTE!
Never use a machine with a defective muffler.
Cooling system
To maintain as low an operating temperature as possible the engine is equipped with a cooling system.
The cooling system consists of:
1.An air intake on the starter unit.
2.Cooling fins on the flywheel.
3.Cooling fins on the cylinder
4.Cylinder cover (leads cold air onto the cylinder).
Clean the cooling system using a brush at least once a week, in difficult conditions more often.
A dirty or blocked cooling system leads to the engine overheating resulting in damage to the cylinder and piston.
Spark plug
WARNING! |
Mufflers fitted with catalytic converters |
! become extremely hot during use and after |
stopping. This also applies at idling speeds. |
Contact can result in burns to the skin. Be |
The condition of the spark plug is affected by:
•An incorrect carburettor setting.
•An incorrect fuel mixture (too much or faulty oil).
•A dirty air filter.
These factors cause deposits on the spark plug electrode that may result in malfunction or starting difficulties.
0,5 mm |
observant to the risk of fire! |
WARNING! |
! The coating on/in the catalytic element can |
be hazardous to health if consumed. Wear |
protective gloves when carrying out service |
work on the catalytic converter. |
If the machine is low on power, difficult to start or runs poorly while idling always check the spark plug first before taking any other action.
If the spark plug is dirty, clean it and at the same time check that the electrode gap is 0.5 mm. The spark plug should be changed after about one month of operation or earlier if necessary.
NOTE! Always use the recommended type of spark plug. An incorrect spark plug can damage the cylinder/piston.
18 – English
