Tektronix 560 user manual When to replace components, Transfer Kitreplace

Caring for Your Printer 6

When to replace components

When the printer’s front panel indicates that a component needs to be replaced, make sure that you have replacements on hand. The printer may continue to print until the component is completely used up; for the toner and Fuser Roll, the printer stops until you replace them. The Imaging Unit and Fuser continue to print.

Printer component	Front panel message	Average life*	Order number
TONER CARTRIDGES	<color> low
		10,000 pages	Black	016-1536-00
	Change the color toner soon.
		(CMY)**	Cyan	016-1537-00
	Stopped:		Magenta	016-1538-00
		12,000 pages	Yellow	016-1539-00
	Replace:<color>
		(Black)**
	Change the color toner now.
IMAGING UNIT	Imaging Unit:replace	57,000 images		016-1523-00
		or
	Change the Imaging Unit soon.
		14,250 color pages
	Imaging Unit expired	60,000 images
		or
	Change the Imaging Unit now.
		15,000 color pages
FUSER	Fuser:replace
		27,000 pages
	Change the Fuser soon.		110 Volt	016-1534-00
			220 Volt	016-1535-00
	Fuser expired
	Change the Fuser now.	30,000 pages
FUSER ROLL	Fuser Roll:replace	15,000 pages		016-1556-00
	Change the Fuser Roll soon.
	Stopped:	15,500 pages
	Fuser Roll:replace
	Change the Fuser Roll now.
TRANSFER KIT				016-1533-00

Transfer Kit:replace

Change the Transfer Kit now.

60,000 pages

*These figures are based on an average of 5% coverage of the printable area for any one color using laser paper. The frequency of replacement will vary, depending on the complexity of the prints, the percentage of coverage, and the type of media. Transparencies, glossy coated paper, and other specialty media will result in shortened consumable life.

**The starter cartridges that are shipped with the printer have an average life of approximately 3,000 pages, based on an average of 5% coverage.

User Manual 6-3