Tektronix 560 user manual Calibrate Colors menu selections, Menu item What it does How it works

				Printing: Beyond the Basics 5
		The following table shows the selections available in the Calibrate
		Colors menu, along with a brief explanation of each function.
Calibrate Colors menu selections
Menu item*			What it does	How it works
Adjust light/dark			Lightens or darkens all toner	■ Press the Menu button.
<----	---->	Menu	colors.

Lighter/Darker:+0 *

<---- ----> OK

Lightens or darkens all toner colors.

The current Light/Dark setting reflects the average value of the four separate density settings. Each increment adjusts all four density values up or down the same amount. The available adjustment range is limited so that no single color exceeds the ±10 value limit.

■To lighten colors, press the left arrow button (the number decrements in

1-point steps); then press the OK button.

■To darken colors, press the right arrow button (the number increments in 1-point steps); then press the OK button.

Adjust each color						Controls the color density for	■ Press the Menu button.
<----	---->			Menu		each color independently.
Color Reference Page						Prints a sample of the current	■ Press the Print button.
<----		---->		Print		density setting and a range of
						settings for each color.
Adjust <color>:						Enters the menu to calibrate a	■ Press the Menu button.
<----		---->		Menu		single color.
	Adjust <color>:+0				*	Calibrates the indicated color.	■ To lighten this color toner, press the left
	<----		---->		OK		arrow button (the number decrements in
							1-point steps); then press the OK button.
							■ To darken this color toner, press the right
							arrow button (the number increments in
							1-point steps); then press the OK button.
Reset adjustments						Resets the color calibration to	■ Press the Menu button; then press the
<----		---->		Menu		the default settings.	Confirm button.

*An asterisk (*) on the front panel selection indicates the current setting.

User Manual 5-7