Tektronix 560 user manual Using the AdobePS 4 driver with Windows, Details, Paper, Graphics

4Printing Basics

Using the AdobePS 4 driver with Windows 95

To select printing options in the AdobePS 4 driver, follow these steps:

1.In the Printers window, click the Phaser 560 printer icon with the right mouse button, then select Properties from the menu.

2.Click the following tabs to see printing options; refer to your Windows 95 documentation for more information on tabs and options.

Details For timeout settings and other options

■Set the Timeout settings. Refer to “Setting the timeouts” on page 4-11 for instructions.

Under PostScript Timeout values, leave Job Timeout set to 0. Set WaitTimeout to the default, 240 (4 minutes). Setting it higher ensures that you will not lose a multi-page job due to a timeout after the Transmission Retry alert message is displayed.

Paper	For media options (sizes, types, and source)
Graphics	For graphics options

■Refer to the on-line manuals on the printer’s CD-ROM for more information on host color correction.

Note Use the Print Quality selections in the Device Options tab instead of the Resolution Options in the Graphics tab.

Device Options For printer-specific options (color corrections)

■Select Installed for the optional Lower Tray Assembly if your printer has this accessory. You must make this selection for the optional media trays to be available under the Paper tab.

■Refer to the on-line manuals on the printer’s CD-ROM for more information on host color correction.

4-4 Phaser 560 Color Laser Printer