Tektronix 560 user manual Replacing the Fuser Roll

6Caring for Your Printer

Fuser Roll

Front panel messages

Fuser Roll:replace

Stopped:

Fuser Roll:replace

Replace the Fuser Roll soon. After the message appears, the Fuser Roll may still yield about 500 pages.

Replace the Fuser Roll now; the printer stops until you replace the Fuser Roll.

Diagnosing print quality

■A piece of the printed image is missing and reappears out of place.

■A piece of the printed image appears faded.

■If media frequently wraps around the Fuser.

■Print the Consumables Page from the front panel.

■Check the % Remaining gauge.

■Print the Confi guration Page from the front panel or access the front panel System Counts menu.

■Check the Fuser Roll Count; compare the number to the component’s average life (refer to page 6-3).

Replacing the Fuser Roll

1.Open the printer’s front door and remove the Fuser.

2.Unlock the Fuser Roll by pressing outward on its tabs; remove the Fuser Roll and dispose of it as normal office waste.

3.Unpack the new Fuser Roll. Be careful not to touch the oiled cloth.

4.Place the new roll into the Fuser; press down firmly on the roll with both hands to lock it into place.

5.Slide the Fuser into the printer and tighten the thumbscrew. Close the printer’s front door.

Note A Fuser Roll is always included with each replacement Fuser.

6-8 Phaser 560 Color Laser Printer