Tektronix 560 user manual Setting up the printer on a network Windows NT 3.5, TCP/IP connection

3Installing Printer Software

Setting up the printer on a network (Windows NT 3.5 and 3.51)

TCP/IP connection

Note Windows NT 3.5 and 3.51 include network software called Services for Macintosh (AppleTalk) and TCP/IP print services (for TCP/IP; lpr print services). Refer to your Windows NT manual for instructions on installing this network software. After this software is loaded, follow these steps:

1.Select Create a new printer in the Print Manager; select the appropriate printer driver.

2.Select Other in the Print to field of the Printer Properties dialog box.

3.Select LPR Port for Available Print Monitors; click OK.

4.For Name or address of host providing lpd, type your printer’s IP address (or Host name if known to the network).

Note The printer’s IP address may be available on the printer’s Configuration Page. If not, ask your network administrator.

5.For Name of printer on that machine, type in one of the following (use capital letters):

PS	for PostScript
AUTO	for automatic selection

6.Click OK to complete the installation.

3-12Phaser 560 Color Laser Printer